3'' to 4'' Selkirk VP Pellet Vent Pipe Thru-the-Wall Kit - 3/4VP-KIT

Description

The Selkirk 3/4VP Thru-the-Wall Pellet Stove Kit is designed for horizontal installations only.
Kit Includes:
1 - 4" 90° Elbow
1 - 4" Tee Support
1 - 4" Wall Bracket
1 - 4" Wall Thimble
1 - 4" Horizontal Cap
1 - 4" Pipe Connector
1 - 3" Pipe Connector
1 - 4" Tee with Cleanout
1 - 3" to 4" Pellet Increaser
5 - 4" One-foot Pipe Lengths
VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).
Additional Information:
Metalbestos gives you the safe, efficient, and cost-effective venting system that's engineered precisely for pellet and corn burning stoves. Model VP Pellet Pipe has been tested and listed by Underwriters' Laboratories, Inc., in accordance with UL-641 Standard for Low Temperature Venting Systems, as well as the applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. Model VP Pellet Pipe, when installed according to Metalbestos installation instructions, complies with National Safety Standards, such as NFPA-211. The system is rated for flue temperatures up to 570° F.
Specifications:
Diameter: 4"
Clearances: 3" clearance to combustibles
Listings: UL 641 (Standard for Low Temperature Venting). UL 103 (Standard for Residential Type and Building Heating Appliance Chimneys)
1 - 4" Horizontal Cap
1 - 4" 90° Elbow
1 - 4" Wall Bracket
5 - 4" One-foot Pipe Lengths
1 - 4" Tee with Cleanout
1 - 4" Wall Thimble
1 - 4" Tee Support
1 - 3" to 4" Pellet Increaser
1 - 4" Pipe Connector
1 - 3" Pipe Connector